lambda – Autologik Motorsport https://autologikmotorsport.co.uk Custom services for performance vehicles Sun, 12 Nov 2023 08:28:37 +0000 en-GB hourly 1 https://wordpress.org/?v=6.4.3 Wideband O2 sensor (LSU49) https://autologikmotorsport.co.uk/product/wideband-o2-sensor-lsu49/ Sun, 08 Aug 2021 06:48:18 +0000 https://autologikmotorsport.co.uk/?post_type=product&p=1036
  • Link G4+/G4X Fury and G4+Thunder ECU’s – These have on-board LSU4.9 wide-band control.
  • Link CAN-Lambda Controller – These are sold new with a sensor, so this sensor by itself is only required if you need a replacement.
    • ]]>     This sensor can be used with all wide band controllers and ECU’s that support LSU 4.9 sensors. This includes:

     

    • Link G4+/G4X Fury and G4+Thunder ECU’s – These have on-board LSU4.9 wide-band control.
    • Link CAN-Lambda Controller – These are sold new with a sensor, so this sensor by itself is only required if you need a replacement.

     

    Specifications:

    Application: lambda 0.65 to ∞

    Exhaust gas temperature: 930°C (1,030 for a short time)

    Hexagon temperature: 600°C

    Thread: M18x1.5

    Weight: 120 g

    Incudes 5 pin plug and pins.

    ]]>         Link CAN Lambda https://autologikmotorsport.co.uk/product/link-can-lambda/ Sun, 25 Jul 2021 16:56:16 +0000 https://autologikmotorsport.co.uk/?post_type=product&p=1021 Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket ECUs. If using the CAN Lambda with a G4+/G4X PlugIn ECU use a Link CANPCB cable to access the CAN port on the PlugIn PCB and a Link CANF field insertable CAN plug.]]> Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket ECUs.

    If using the CAN Lambda with a G4+/G4X PlugIn ECU use a Link CANPCB cable to access the CAN port on the PlugIn PCB and a Link CANF field insertable CAN plug.

    ]]>         ECU Master Lambda to CAN https://autologikmotorsport.co.uk/product/ecu-master-lambda-to-can/ Sun, 25 Jul 2021 06:45:01 +0000 https://autologikmotorsport.co.uk/?post_type=product&p=984 Ecumaster Lambda to CAN controller is a compact device used to control a Bosch LSU 4.9 wideband oxygen sensor and transmit the lambda reading via CAN-BUS. Two programmable 0-5V analog signal lines are available, along with the CAN transmission.
    The controller uses a dedicated Bosch integrated circuit paired with an automotive grade digital controller to precisely manage the oxygen sensor and calculate Lambda and AFR.
    Multiple controllers may be used at the same time on one CAN–BUS, lending installation flexibility.

    Key features

    •Bosch LSU 4.9 support (ADV version also available)
    •Operating voltage range: 9 -16V
    •Current consumption: up to 3A (during warm up)
    •IP65 enclosure
    •2 programmable analog outputs 0-5V
    •Communication and setup: CAN 2.0A/B

    ]]>