The high contrast OLED display is bright for interior use and dims at night. Configure 1, 2, or 4 gauge layouts on up to 10 different pages. Pages can be scrolled through using the easy to access front buttons. Create customizable warning points, such as the coolant temperature being too high, which trigger a special warning screen and bright LED on the face of the gauge.

Easily customize your CAN Gauge to display the data you want to see with the free to download app (compatible with Android 4.4 or later and Apple iOS). The easy-to-use app works with your smartphone or tablet to wirelessly customize your gauge in minutes and is a lot easier than trying to configure your gauge with only buttons on the front!

Box Contents

1 x 52mm OLED CAN Gauge

1 x DTM4 CAN Gauge Connection Cable

1 x DTM4 Mating Connector Kit

1 x Mounting Bracket

1 x Quickstart Guide

2 x Link Stickers

The unit transmits button presses over the CAN network reducing the amount of wiring required between the control panel and other devices.

In modern cars, there are many actuators and pumps driven by DC
electric motors which require relatively high current along with precise
duty cycle control and direction. A few examples are variable valve lift
mechanisms, multiple ITBs using one control unit and power windows.
Sometimes the best option is to use remotely installed high current
H-Bridges. Our new module consists of two 10A H-Bridges controlled
directly or via CAN messages.

This solution is perfect for BMW ITB electronic throttles (quite a high
current required) when the module acts as a bridge between an aftermarket
ECU and the throttle. Another common installation is in a door, where one
H-Bridge can operate power windows and second lock functionality.
This device can also be used as a high current general purpose output
expander (4 x 10Ahigh side / low side outputs) for engine management
systems.

CNC machined aluminium enclosure facilitates perfect heat dissipation
and environmental protection which is a key factor of product reliability.

Key features

•2 H-Bridge 10A continous current, 30A peak
•Direct control or via CAN messages
•Free firmware upgrades
•Configurable via CAN BUS

Key features

•Bosch LSU 4.9 support (ADV version also available)
•Operating voltage range: 9 -16V
•Current consumption: up to 3A (during warm up)
•IP65 enclosure
•2 programmable analog outputs 0-5V
•Communication and setup: CAN 2.0A/B

A CAN switch board is a tiny device to allow easy transfer of up to 8 switch states and 8 analog signals over the CAN bus. In addition to this, the device has 4 built-in low side outputs that can be activated with a CAN bus message. The main purpose of this board is to build custom steering wheel panels containing buttons, rotary switches and indicators.  The switchboard device is designed to work with EMU BLACK and PMU. It can also be used with any other devices with custom configurable CAN bus inputs.

Key features

• CAN BUS 2.0B
• 500 or 1000kbps, user selectable
• different CAN ID and CAN frame structures can be selected,
• only 25x25mm in size,
• 8  switch inputs (switched to ground)
• 8 analog inputs / rotary switch inputs, 0-5V, 10bits
• 4 low side outputs (0.5A, resistive and inductive loads)
• 6-22V power supply
• +5V output for powering rotary switches, sensors and potentiometers
• firmware upgrade over the CAN bus

Built in LEDs indicate button state (RGB colors) and additionally act as back-light for the keyboard.

The behaviour of individual keys is fully configurable using EMU BLACK or PMU client software.

The unique idea of a replacement system for individual inserts means it is easy to rearrange the keypad layout using the existing insert without affecting appearance. Moreover, custom inserts can be supplied. Plastic laser engraved inserts are not included in keyboards box.

Key features

• CAN bus compatible keyboard,
• 125kbps, 250kbps, 500kbps, and 1000kbps CAN bus speed supported,
• works with EMU BLACK (1 keyboard) and PMU devices (up to 2 keyboards),
• full customization possible,
• IP 67 rated